EVB Aquaseal Waterproof Tanking Membrane 5 litre
Description
The Aquaseal Waterproof Tanking Membrane can be used on its own in many applications where a flexible watertight membrane is required, or in conjunction with Aquaseal Tanking Primer, Aquaseal Tanking Tape and Aquaseal Tanking Drain Mat, as part of the Aquaseal Wet Room System, to provide a 100% waterproof membrane to conventional plaster and timber based boards. It can be applied to all common building substrates such as plasterboard, MDF, plywood cementitious boards, blockwork, concrete and speciality wet room boards.
Benefits:
• Can be used on most common building surfaces
• Ready to use, no diluting necessary
• Easy to apply by brush
• Non-hazardous, solvent free
• Can be tiled over after 12 hours
Areas for Use:
• For showers, wet rooms and wet zones in bathrooms
• As a Tanking membrane as part of the Aquaseal Wet Room System
• As a Primer on most common building surfaces
• Balconies and partially covered external areas
Limitations:
• Do not apply below 10°C
• Do not apply externally when rain is imminent (within 6 hours)
• Do not apply second coat until the first is dry
• Damp or humid conditions will significantly extend drying time
• It is the user’s responsibility to determine suitability for use. If in doubt contact Everbuild Technical Services for advice
Size: 5L Tub
Specifications
Catalog Page Number
509
Brand
Everbuild
Categories
Hand Tools
Category
Tiling Tools
Country of Origin
United Kingdom
Dimensions (WxDxH)
220x200x220mm
Form
Tanking Membrane
Manufacturer
Everbuild
Size
5 Litre
Type
Tiling Tools
Weight
6.977kg
selection not available, try a different combination
selection not available, try a different combination
Compare